Sharpie Pen Science A tie dye technique without the mess, using Sharpie Markers! email to friend
print this page

• Place the plastic cup inside the middle of the t-shirt. Position the opening of the cup directly under the section of the shirt that you want to decorate. Stretch the rubber band over the t-shirt and the cup to secure the shirt in place.

• Place about 6 dots of ink from one marker in a circle pattern about the size of a quarter in the center of the stretched out fabric. If you like, use another color maker to fill in spaces in between the first dots. There should be a quarter size circle of dots in the middle of the plastic cup opening when you are finished.

• Slowly squeeze approximately 20 drops of rubbing alcohol into the center of the circle of dots. As the rubbing alcohol absorbs into the fabric, the ink spreads in a circular pattern expanding outward from the center. The result is a beautiful flower-like pattern, however, students often remark that the design looks like the colorful surface of a compact disc.

• Apply as much or as little rubbing alcohol as desired, but do not let the pattern spread beyond the edges of the cup. Allow the developed design to dry for 3 to 5 minutes before moving on to a new area of the shirt.

You'll enjoy experimenting with various patterns, dot sizes, and color combinations. Instead of using dots, try drawing a small square with each side being a different color, or use primary colors to draw a geometric shape, and accent it with dots of secondary colors. Half circles, wavy lines, and polygons all make unique patterns when rubbing alcohol travels across the ink. Your designs are only limited by your imagination. Try as many different patterns as you like. The secret is to keep your patterns small and in the center of the design area on the shirt. DO NOT flood the design area with rubbing alcohol. The key is to drip the rubbing alcohol slowly in the center of the shirt and allow the molecules of ink to spread outward from the center.

How does it work?

This is really a lesson in the concepts of solubility, color mixing, and the movement of molecules. The Sharpie markers contain permanent ink, which will not wash away with water. However, the molecules of ink are soluble in another solvent called rubbing alcohol. This solvent carries the different colors of ink with it as it spreads in a circular pattern from the center of the shirt.

Additional Info

It's important to heat set the colors by placing the shirt in the laundry dryer for approximately 15 minutes. Teachers have also suggested rinsing the shirt in a solution of vinegar and water as a means of setting the colors. CAUTION: Rubbing alcohol is very flammable and must be kept away from any open flames or heat. This experiment must be conducted in a well-ventilated area, preferably outdoors or in a room with open windows. Reference: This activity is the creation of Bob Becker, a chemistry teacher in Kirkwood, Missouri.