Singing Glasses What dinner party is complete without a song from the Wine Glass? email to friend
print this page

1. Fill the glass about half-full with water. Dip your pointer finger into the water (or vinegar) to clean it. Use a napkin to wipe off any dirt or oil on your finger. Clean is good.

2. You’ll need a little moisture to help, so dip your finger into the water again. Set your clean, moist finger on the rim of the glass, press down slightly, and rub it all the way around the rim without stopping. Keep going in a circular motion along the lip of the glass while maintaining the pressure, and in almost no time you’ll have displayed a newfound musical talent.

3. Several things have to be just right for a tone to be produced: pressure, moisture, glass type, etc. Keep trying because it’s worth it and once you get there, it’s hard to stop.

How does it work?

You are demonstrating the principle of “stick and slide.” As you rub your finger on the rim, your finger first sticks to the glass and then slides. This stick and slide action occurs in very short lengths and produces a vibration inside the glass which, in turn, produces a sound. Vinegar helps to clean dirt and oil from your finger. A clean finger improves the stick and slide action. As soon as the first few vibrations are produced, the glass resonates. That means you’re causing the crystals in the glass to vibrate together and create one clear tone. You can change the pitch (highness or lowness of the sound) by adding to or subtracting from the amount of water in the glass. The volume (loud or quiet) can be changed only a little bit by increasing or decreasing the pressure from your finger. Just think about the “jam session” you'll have with your dinner guests!